The SRT-4 being a high horsepower turbocharged car runs a significant amount of piston-to-wall clearance. The cylinder pressure from the forced air creates more heat in turbocharged applications, thus DCX designed a "loose" engine for added safety and longevity purposes. Unfortunately, a byproduct of an engine that allows a lot of blow-by is oil residue makes its way past the PCV system and ends up in the intake manifold, and many other places.
Oil residue in the combustion chamber of an engine is bad news, and can lead to really bad news with respect to how your engine runs. We have been testing a real solution for a while now that will actually separate the oil from the air flowing between the PCV and intake manifold. It sounds easy enough, and many people have tried to adapt simple catch cans and industrial water valves to remove the oil from the air. These systems are not as effective as a full on accumulator.
AGP's three chamber SRT-4 oil separator gathers the airborn oil particles through the middle chamber. Oil is separated from the air through the filtering media and drains through a perferated aluminum plate on the bottom side of the middle chamber then accumulating in the bottom chamber. As this oil gets filtered through the middle chamber, clean air is then filtered again and exits through the top chamber. This three chamber system design provides the best protection against unwanted oil making its way to the combustion process.
The bottom of the AGP SRT4 Oil Accumulator has a threaded 1/4" NPT bung and a plug to allow the user an easy way to drain the oil. AGP's SRT-4 Oil Accumulator is completely constructed of aluminum and is highly polished to provide some extra 'bling' to your engine bay. This will fit the SRT-4 perfectly and comes with hose and hose clamps for an easy installation.
