• This product is a monitoring multi meter designed for 2003 or later Toyota CAN-bus or vehicles equipped with 1996 or later ISO14230 diagnostics connector.
• Easy Installation - Installation just by connecting to the vehicle diagnostics coupler.
• 65,000 Color LCD screen and multi angle display.
  - Can be set on three different angles depending on the location of the installation.
• Monitors a maximum of 29 items and able to display 6 monitored items simultaneously.

Monitored items are: Speed, RPM, Water Temp, Ignition Timing, Fuel Injection Time, Air Flow Voltage, Outside Temp, Intake Manifold Pressure, Boost, O2 Voltage, O2 Rear Voltage, AF 1, AF 2, Intake Air Mass , Battery Voltage, Throttle Output, AT Temp, Gear Position, 4WD Ratio, Fuel Pressure, Momentarily Fuel Consumption, Malfunction Diagnosis Code, Lock Up ON ' OFF, External Voltage Input (Press, A/F Box) / External Temp Input, Fuel Pressure Control, Fuel Injection Control / Electric Fan Control, etc.

• Depending on the vehicle, the monitored items vary or cannot be monitored.
• The optional Press Sensor (or) the A/F Box must be separately purchased to display the external voltage input.
• The optional Temp Sensor must be separately purchased to display the External Temp Input.

Press Sensor Set (Code: 19211) 130.00 USD retail price.
Temp Sensor Set (Code: 19210) 130.00 USD retail price.
A/F Box (Code: 15063) 550.00 USD retail price

The Fuel Pressure, Fuel Injection and Electric Fan can be controller actively. There are some vehicles that this function cannot be used.

• The fuel pressure can be controlled every 100 RPM and can be increased of decreased from 9.9 to 25%.
• The fuel injection can be controlled every 500 RPM within the 3000 RPM range and can be increased of decreased up to ± 25%.
• The electric fan be controlled to go ON or OFF within 20 to 100 ' of the water temp.

Data Record and Play /Graphical Display

Maximum of 10 minutes recording time. Graphically displays the AF 1/ AF 2 and the external voltage input based on RPM. (Useful for tuning)

Only the external voltage input can be displayed if the AF 1/ AF 2 cannot be monitored.