Light aluminium anodized bushing provides minimal compliance under loads
to maintain dynamic geometry & ultimately more grip. Other features
include high performance/ low compliance heim bearing to reduce the
effects of toe steer & maintain a more consistent toe angle under
hard cornering & a replacement slotted pin for up to 12mm of toe
adjustment.
Whiteline Alignment Products Camber is the inclination of the wheel from the
vertical when viewed from the front. When the top of the wheel leans
out you have positive camber, lean in equal’s negative camber. Static
negative camber is used to compensate for body roll, body distortion and
tyre roll under when cornering.
Caster is the backward or forward tilt of the steering
axis. Vehicle manufacturers are aware of the advantages of caster and as
each new model is released the amount of caster specified increases.
High levels of positive caster equate to dynamic negative camber on turn
when you need it most. Whiteline continues to put heavy emphasis on
additional positive caster when designing new suspension packages.
Toe describes how close to parallel the two tyres are,
and whether they are toed-in (closer at the front of the tyre) or
toed-out (closer at the rear of the tyre). The goal of toe is to provide
proper tyre wear through various driving conditions. The amount of toe
your suspension is set to varies by the drive layout of your vehicle,
driving preference, and car's handling characteristics.
"Anti" features in suspension systems are a
characteristic that can be used to influence the stiffness of the front
or rear suspension under traction forces(under braking or accelerating).
The individual terms are relatively straightforward and
self-explanatory with the “anti” reducing or totally restricting the
characteristic (lifting or diving). In the front suspension there may be
levels of anti-dive during braking and anti-lift during accelerating
(assuming traction to the front wheels is present), similarly in the
rear there could be anti lift during braking and anti-squat during
acceleration.
Fits:
- Mitsubishi Lancer CJ 07-On fwd (inc DE, ES, VRX & GTS (NA)) - Mitsubishi Lancer Ralliart CJ 08-On turbo awd
