Brian Crower Stage 3 280 Race Spec Camshafts for 08+ Subaru STi EJ257B
E-mail this product to a friend

These are race specification camshafts, suitable for a longer duration profile and added rpm potential. Recommended for use in a fully built engine with proper tuning and engine management.

Longer duration profile, added rpm potential. Intended for fully built engine. Tuning and ECU mods recommended. Requires kit BC0600.

CAMSHAFTS - STAGE 3 (Subaru EJ257B - Dual AVCS STi - 08-up) SET/4

Bucket Diameter: 1.200"
Full Set of 4
Note: Intake camshafts are setup for AVCS operation. These cams WILL WORK with AVCS. If running non AVCS setup is desired, you must install the four set screws (located in a plastic bag attached to the cam bag) in the front of each intake cam (dowel pin side) using a 2.5mm Allen wrench and LocTite. This will not allow oil to actuate the Active Valve Control System.


Brian Crower Stage 3 Camshafts

Adv. Dur. 280°/280°

Dur. @ .050 234°/234°

Lift (in) .425"/.425"

Lift (mm) 10.80/10.80

As compared to:
USDM Stock STi EJ257 Camshafts

Adv. Dur. 256°/256°

Dur. @ .050 204°/208°

Lift (in) .378"/.385"

Lift (mm) 9.60/9.78