Brian Crower Stage 2 272 Street Spec Camshafts for 08+ Subaru STi EJ257B
E-mail this product to a friend

These are street specification camshafts, ready to install in a stock to lightly modified engine. These camshafts feature a short duration for streetability and produce a slight lope at idle. Excellent all purpose camshaft for street/strip use.

Plug and play application. Short duration for nice street manners, slight lope at idle. Excellent all purpose spec. OEM spring OK.

CAMSHAFTS - STAGE 2 (Subaru EJ257B - Dual AVCS STi - 08-up) SET/4

Bucket Diameter: 1.220"
Full Set of 4
Note: Intake camshafts are setup for AVCS operation. These cams WILL WORK with AVCS. If running non AVCS setup is desired, you must install the four set screws (located in a plastic bag attached to the cam bag) in the front of each intake cam (dowel pin side) using a 2.5mm Allen wrench and LocTite. This will not allow oil to actuate the Active Valve Control System.


Brian Crower Stage 2 Camshafts

Adv. Dur. 272°/272°

Dur. @ .050 222°/222°

Lift (in) .400"/.400"

Lift (mm) 10.16/10.16

As compared to:
USDM Stock STi EJ257 Camshafts

Adv. Dur. 256°/256°

Dur. @ .050 204°/208°

Lift (in) .378"/.385"

Lift (mm) 9.60/9.78