     |
The Essence Of Professionals!
The PROCAM series are for the serious users who need results when every milli-seconds count. The heart of the VQ35 NA engine lies with the camshafts. The camshafts are the key starting point for tuning this engine. TOMEI ProCam camshafts will give you the best driving experience and the overall satisfaction with your VQ35 engine. CAUTION! When running camshafts with cam lifts greater than 11.3mm on the intake (IN) side, please take care with the specific engine type you are applying the product to due to possible wear or interference from caused due to the valve springs and/or the pistons (if running the standard pistons without valve recession). You may have to adjust the timing to suit the application. Please observe all apsects when installing the camshafts. Example: When using the standard head and standard piston with the standard eVTC setup, approx 1mm of valve recession is required for adequate clearance.
* The above camshafts are sold as a pair for each side, either Inlet or Exhaust. * 142015, 142016, 142017, 142018 Compatible with Standard Compression Ratio. * 142025, 142026, 142027, 142028, 142029, 142030 Compatible with High Compression Ratio. * Cams with cam lift greater than 11mm will require the valve springs to be upgraded as well. * Cams with cam lift greater than 11mm will require valve recession on the standard pistons as well. * Valve timing has already been adjusted, compatible with (eVTC) system. * Not compatible with engine models with variable valve timing (eVTC) on the exhaust side. (Also not compatible with the Z33 Anniversary edition from Sept 2005 onwards).
Options:
|
|
