Brian Crower Stage 2 Street Spec Camshafts for Honda S2000 Turbo
E-mail this product to a friend

These are street specification camshafts, ready to install in a stock to lightly modified engine. These camshafts feature a short duration for streetability and produce a slight lope at idle. Excellent all purpose camshaft for street/strip use.

Short duration profile builds cylinder pressure by reducing overlap, high lift for more air intake. Requires kit BC0040.

Rocker Ratio: 1.72:1 mid, 1.7:1 sec, 1.7:1 pri
WARNING: If running a late model cylinder head (after 2004), you may need to purchase BC2940 keepers to accommodate the BC2010 or BC2011 retainers. Honda changed the keeper groove angles, therefore your stock keepers/locks may not fit the BC retainers properly, causing potential damage.

Brian Crower Stage 2 Camshafts

Adv. Dur. 280°/276° 244°/240° 232°/230°

Dur. @ .050 230°/226° 172°/170° 166°/164°

Lift (in) .500"/.466" .330"/.330" .310"/.310"

Lift (mm) 12.70/11.84 8.38/8.38 7.87/7.87

As compared to:
USDM Stock F20C Camshafts

Adv. Dur. 300°/298°

Dur. @ .050 226°/222°

Lift (in) .498"/.459"

Lift (mm) 12.65/11.66

As compared to:
USDM Stock F22C Camshafts

Adv. Dur. 296°/296°

Dur. @ .050 224°/222°

Lift (in) .487"/.475"

Lift (mm) 12.37/12.06