These are street specification camshafts, ready to install in a stock to lightly modified engine. These camshafts feature a short duration for streetability and produce a slight lope at idle. Excellent all purpose camshaft for street/strip use.
Plug and play application. Short duration for nice street manners, slight lope at idle. Excellent all purpose spec. OEM spring OK.
Bucket Diameter: 1.220" Full Set of 4 Note: Intake camshafts are setup for non AVCS operation. If running AVCS, you must completely remove the four set screws located in the front of each intake cam (dowel pin side) using a 2.5mm Allen wrench. This will allow oil to actuate the Active Valve Control System.
